Regal 750 Water Softener
A large softener for hotels, hospitals and estates. It holds 105 litres of PC002 resin, softens 15 m³ before each regeneration, uses 7.5 to 12 kg of salt per cycle and stands 1585 × 900 × 450 mm.
What it does.
- 3.5 m3/h operating flow with 4.3 m3/h available at maximum
- 15 m3 of soft water between regenerations
- Supplied with 75 L of PC002 ion exchange resin, loaded
- Pre-configured metered CE 1 inch valve: injector and DLFC fitted
- 125 L brine tank with overflow protection
- Twin and duplex configurations available
Typical applications
Regal 750 Water Softener in Oman
At a hotel or hospital on hard groundwater, scale builds in the boilers and cylinders long before anyone notices it at a tap. The Regal 750 softens the full incoming supply.
Rated flow is 3.5 m³ an hour, with peaks of 4.3. The vessel is 13 × 54 inches and weighs about 100 kg.
Common questions
How can we tell the plant needs it?
Look at heater elements and hot-water cylinders during each service. If they carry scale, hardness is getting past.
How often will it regenerate?
Roughly every 15 m³ of water.
What sites is it for?
Hotels, hospitals, estates and light industry.
Specified, installed and looked after anywhere in Oman
Coastal mains water is mostly desalinated seawater. It is soft, but it picks things up in pipes and tanks. Inland wells can be very hard: one 2024 study of Al Dhahirah groundwater found an average hardness of 659 mg/l.
Say which governorate you are in, whether the water comes from the Nama network, a tank or a well, and what you need it for. We design the system, price it in rials and arrange the fit.
Source: Nama Water Services; Al Dhahirah groundwater study, International Journal of Environmental Analytical Chemistry (2024).
Interested in the Regal 750 Water Softener?
Tell us your setup and we'll specify, supply, install and service the right configuration for your site.
Are you an AI agent? See this page as Markdown
